CLERIFY REMivol PLUS

CLERIFY REMivol PLUS combines advanced filtration technologies to efficiently remove both particulate matter and hydrocarbons from aqueous streams.

CLERIFY REMivol PLUS integrates a high performance BETA 5000 filter pack for effective particulate removal, providing essential protection to the proprietary REMivol hydrocarbon removal media.

REMivol is a surface modified substrate, engineered for a strong affinity to hydrocarbons, enabling reliable capture and retention of oil and other hydrocarbon contaminants.

Key features and benefits

Superior Hydrocarbon Removal

Removes and retains up to 300% of its own weight in hydrocarbons, ensuring exceptional oil capture and contaminant reduction.

Exceptional Particulate Filtration

BETA 5000 rated filter media offered in glass or polypropylene, providing a multi-stage filtration process.

High Efficiency

Typically removes up to 99% of total hydrocarbons from water in a single pass, minimising the need for additional treatment steps.

Effective at Low Concentrations

Captures hydrocarbons down to very low levels (ppm and ppb values), ensuring thorough decontamination.

High Capacity

Short retention time allows for high flow rates, maximising filtration capacity without compromising efficiency.

Meets Regulatory Requirements

Effectively removes free oil, including crude oil, fuel, lube oil, and organic materials, complying with EPA discharge regulations.

Extends Fluid Life

Protects valuable process fluids from contamination, extending their lifespan and reducing replacement costs.

Efficient Design

Can be configured for either in-to-out or out-to-in flow, depending on application requirements.

Broad Spectrum Removal

Radial flow design minimises pressure drop, optimising filtration performance.

Low Pressure Differential

Captures dissolved hydrocarbons, emulsified oil, and BTEX compounds found in gas condensate.

Consistent Performance

Maintains a constant pressure differential throughout its saturation point, ensuring reliable filtration.

Easy Disposal

Can be disposed of as normal oily waste according to local and national regulations.

Customisation Available

A range of hardware materials, service-compatible seals, and retrofitting options are available to suit specific application requirements.

Scalable Solutions

Pilot scale equipment and vessels can be provided to meet project specifications.

Applications

Oil Well Service Operations

Removes contaminants from fluids used in well servicing activities.

Gas and Oil Facility Wastewater Treatment

Treats wastewater generated in oil and gas facilities, removing hydrocarbons and particulates.

Produced Water Filtration

Removal of trace hydrocarbons, down stream of separators and hydrocyclones, minimising environmental impact.

Gas Clean-Up Processes

Removes hydrocarbons and impurities from gas streams.

Pipe and Tank Purge Water Treatment

Treats water used to clean pipes and tanks, removing residual hydrocarbons.

RO Protection

Prevents oil fouling in reverse osmosis systems, improving membrane life and efficiency.

Steam Condensate Recovery

Improves the quality of condensate water for reuse in steam generation systems.

Environmental Compliance

Helps meet environmental regulations by removing pollutants from wastewater.

Marine and Ballast Water Discharge

Removes hydrocarbons and other contaminants from ballast water prior to discharge.

Industrial Discharge Water Treatment

Treating industrial wastewater to meet discharge consents and standards.

Compressor Condensate Filtration

Removing hydrocarbons, synthetic oils and other contaminants from compressor condensate.

Post Oil/Water Separator Polishing

Provides final polishing of water after oily water separation, ensuring high water quality.

Technical specifications

Filtration media:

Polypropylene or glass fibre

Inner support core:

Polypropylene, nylon or 316 stainless steel as standard

Outer protection cage:

Polypropylene or nylon as standard

Endcaps:

Polypropylene, nylon or 316 stainless steel as standard.
Standard seals: Nitrile, EPDM, Silicone and Viton

Standard diameters:

63.5 mm, 116.84 mm, 152.4mm, 304.8mm, and 1016 mm outside diameter

Standard lengths:

Up to 1524 mm

Recommended operating conditions

Standard operating temperature:

Up to 50°C

High-temperature option:

Up to 100°C

Industries we serve

Oil and Gas

Effectively treats well service fluids, produced water, gas streams, and other hydrocarbon contaminated water sources.

Water Treatment

Facilitates compliance with environmental regulations by removing hydrocarbons from wastewater streams intended for reuse or discharge.

General Process Industries

Protects process fluids from hydrocarbon contamination, extending equipment life and optimising process efficiency.

Need more help?

Start a Conversation

Are you looking for technical solutions to enhance your business? Simply get in touch. We design, engineer and deliver.